Europull Horizontal Plate Lifting Clamp
Heavy-duty horizontal plate lifting clamp designed to be used in pairs for the horizontal lifting and transportation of sagging and non-sagging steel plates.
- Capacity1.5t - 10t
- Jaw Opening0 - 100mm
Need sizing help? Email info@europull.com
- Certified to EN 13155
- 4 models available
Technical Specifications
Model-by-model data for the Europull Horizontal Plate Lifting Clamp range.
| Model Code | Capacity (Pair) | Jaw Opening (mm) | Test Load (kN) | Net Weight (Pair) |
|---|---|---|---|---|
| EP-HPC15 | 1.5 Ton (Pair) | 0 - 30 mm | 22.5 kN | 6.5 kg |
| EP-HPC30 | 3.0 Ton (Pair) | 0 - 45 mm | 45.0 kN | 11.0 kg |
| EP-HPC50 | 5.0 Ton (Pair) | 0 - 60 mm | 75.0 kN | 18.0 kg |
| EP-HPC100 | 10.0 Ton (Pair) | 0 - 100 mm | 150.0 kN | 36.0 kg |
Need a model or configuration not listed? Email our engineering team or download the full catalog (PDF).
Key Parameters
| Parameter | Specification | Highlight |
|---|---|---|
| Standard / Compliance | EN 13155 / CE Certified | Certified |
| Rated Capacity | 1.5 Ton to 10 Ton (Sold & Used as Pairs) | 1.5t - 10t |
| Jaw Opening | 0 to 100 mm | Thick Plates |
| Configuration | Must be used in Pairs with a 2-Leg Sling | Sling Pair |
| Safety Factor | 4:1 Working Load Margin | Proof Tested |
| Application | Horizontal Steel Plates, Bundles, Sheets | Steel Stock |
Key Features & Advantages
Smooth Roller Cam
Enables smooth feeding of the clamp onto steel plates without binding.
Reinforced Jaw Housing
Resists bending moments under heavy lifting chain sling angles.
Standards & Compliance
EN 13155 Standard
Plate clamp compliance.
CE Certified
150% proof load certified.
Product Overview
Used in pairs or sets of four with a two-leg or four-leg chain sling, Europull horizontal clamps allow safe transfer of large steel sheets from cutting beds and warehouse stacks.
Frequently Asked Questions
The Europull Horizontal Plate Lifting Clamp is available in 4 models: EP-HPC15, EP-HPC30, EP-HPC50, EP-HPC100. Capacity (Pair) ranges from 1.5 Ton (Pair) to 10.0 Ton (Pair). Full figures for every model are in the technical specifications table on this page.
The Europull Horizontal Plate Lifting Clamp covers 1.5t - 10t.
The Europull Horizontal Plate Lifting Clamp is manufactured to EN 13155.
The Europull Horizontal Plate Lifting Clamp's jaw Opening: 0 to 100 mm.
The Europull Horizontal Plate Lifting Clamp's configuration: Must be used in Pairs with a 2-Leg Sling.
The Europull Horizontal Plate Lifting Clamp's safety Factor: 4:1 Working Load Margin.
Click "Request a Quote" on this page to add the Horizontal Plate Lifting Clamp to your quote cart, or email info@europull.com with the model code and quantity you need.
